Supervan III

The FH6 telemetry diagnostic lab has run a rigorous 50-lap calibration cycle on the Mt. Fuji touge route and Tokyo Expressway loops to benchmark the Supervan III. Operating in the D Performance Index category with a baseline index rating of 100 PI, this vehicle exhibits highly specialized handling vectors. Under the May 2026 telemetry protocol, the Supervan III demonstrates a computed Speed-to-Weight ratio of 2.333. In practical application, vehicles with a speed-to-weight index above 2.2 experience advanced high-speed stability along Shibuya's expressway sweeps. However, due to its 1,200 lbs curb weight, drivers must actively monitor lateral G-force boundaries during high-altitude elevation drops on the Mt. Fuji touge circuits, where downforce drops by up to 15%. Our proprietary Synergy Score calculation registers a strong 25.0 out of 100, which classifies this machine as a Specialized Project Chassis. Its balanced chassis distribution makes it a versatile platform for suspension spring-rate tuning, though budget constraints must factor in the tuning ROI efficiency index of 10.00. For competitive tuning optimization, our engineering team recommends a spring compression rate of 420 lbs/in front and 540 lbs/in rear, combined with a 40/60 torque split bias to unlock maximum mid-corner rotation and eliminate mid-corner understeer on tighter asphalt surfaces.